Any
Position
An open-base design permits mounting in horizontal or vertical positions.
Loads can be pulled through the base itself, which is particularly
useful in limited-space installations.
All
Ball & Roller Bearings
Friction load loss is reduced to a minimum through the use of ball
and roller bearings. No bushings means higher efficiency and more
power for pulling.
Power
In - Power Out
For added safety, all winches are fully reversible. This gives the
operator complete control of the winch load in both directions at
all times.
High
Service Factors
Jeamar winches are designed and manufactured for continuous, heavy-duty
operation with a minimum service factor of 1 (one).
Gear
Reducers
All Jeamar hauling winches have high-efficiency helical gear reducers
plus high-capacity, anti-friction bearings for long life, low noise
and high output torque.
Electric
Motors
The full range of Jeamar's heavy duty hauling winches is available
with 3-phase motors in any standard voltage at 50 or 60 Hz. Winch
models NHS 550, NHS 1100 and NHS 1900 are single phase in any standard
voltage at 50 or 60 Hz. All motors are TEFC flange mounted and conform
to NEMA, EEMAC or IEC specifications.
Load
Calculations
For detail on pulling railcars or pulling up grades, send for our
free railcar pulling brochure or see technical notes.
Notice
When a hauling winch is used to move loads on an incline, it is
essential that a brake be used.
|
