The most practical body in today's industry, the low-maintenance Unicell is easy to repair, beautifully shows off company graphics, and is built tough enough for heavy loads without increased weight.

MiniVee, the smallest spreader is produced by the largest spreader company. The MiniVee is designed for the small jobs. The hopper measures only sixty inches in length, twenty-five inches tall and thirty-six inches in width with a capacity of only 56 cubic yard.

The MiniVee can be used for sand/salt application or to apply fertilizing agents to larger turf areas.

Sized between the pick-up size spreader and the large V-box models, Swenson’s Medium Duty Vee (MDV) model brings versatility to your fleet. This unit is produced to cover the gap between the 15,000 GVW and the 20,000 GVW trucks. You’ll have the flexibility of a smaller vehicle with the capacity of a larger unit. The MDV can be driven on its own power or by truck hydraulics.

After giving careful consideration to product improvement requests, common enhancements have been made to our EV Series spreaders. While all the EV Series spreaders are quite similar in design now, the one feature that sets one spreader from the other is the drive train:

EV-150 (50:1 or 25:1 Worm Gearbox with 2” drive shaft, 8 tooth sprockets)

Swenson PV Series units are available in 7 Ft. length PV-350, 8 Ft. length PV-358, and 10 Ft. length PV-3510. Any of the three units in this series will mount or store as a single unit.

PV Series units are versatile enough to mount in most medium or heavy-duty pickup trucks. They will also provide years of rugged service when installed on one-ton trucks—with optional extended spinner.

EV-200 (6:1 Spur Gearbox with 2” drive shaft, 8 tooth sprockets)

After giving careful consideration to product improvement requests, common enhancements have been made to our EV Series spreaders. While all the EV Series spreaders are quite similar in design now, the one feature that sets one spreader from the other is the drive train:

EV-100 (50:1 or 25:1 Worm Gearbox with 1.5” drive shaft, 8 tooth sprockets)

Traditionally styled for maximum cubic capacity, function, and all-around-town drivability, Unicell's ClassiCube is the original in our line of one piece molded fiberglass truck bodies. Thousands of this model have gone to work all over North America.

The Aerocell bridges the gap between cargo vans and cube vans. Designed exclusively for the tough, dependable, comfortable and stylish single rear wheel cutaway chassis, this new van body offers all of the same benefits as the original Aerocell.

The Aerocell SRW bridges the gap between cargo vans and cube vans. Designed exclusively for the tough, dependable, comfortable and stylish single rear wheel cutaway chassis, this new van body offers all of the same benefits as the original Aerocell.